7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
File System Management
Edition: 01 3HE 16132 AAAB TQZZA 91
Directory of cf1:\
10/12/2011 10:37p 4248394 boot.tim
10/17/2011 07:28a 524 sasm.sdx
10/26/2011 10:06p 828 bof.cfg
10/27/2011 09:04p <DIR> act-collect
10/27/2011 09:06p <DIR> act
10/17/2011 07:30a 0 test1.txt
10/26/2011 10:43p 5360 sasm.cfg
10/11/2011 06:42a 28821599 both.tim
10/26/2011 10:42p 14597 bootlog.txt
10/19/2011 04:22a 832 bof.cfg.1
10/17/2011 07:37a 827 test1
10/17/2011 07:38a 827 tes2
10/17/2011 07:38a 827 tes3
10/17/2011 07:39a 827 tes3567
10/17/2011 07:38a 827 tes356
10/18/2011 10:46p 5481 sasm.cfg.1
14 File(s) 33117369 bytes.
2 Dir(s) 80470016 bytes free.
*A:7210-SAS #
3.1.2 USB Storage Device
The 7210 SAS platform supports the use of the USB interface as an alternate
storage location that provides a larger storage capacity than the internal flash. You
can use a USB storage device to store TiMOS images, configuration files, accounting
records, and log files. The BOF can point to images on the USB and you can use the
USB to load TiMOS images and configuration files.
The following guidelines and caveats apply to the use of USB storage devices.
• The option to load the boot loader (boot.tim) from a USB storage device is not
supported on the 7210 SAS-M. the boot.tim boot loader image required to boot
the device must be stored on the compact flash (cf1:).
• The option to load the boot loader (boot.tim) from a USB storage device is
supported on 7210 SAS-T, 7210 SAS-Sx 1/10GE, 7210 SAS-Sx 10/100GE,
7210 SAS-Mxp, 7210 SAS-R6, and 7210 SAS-R12.
• USB ports are supported on all 7210 SAS platforms as described in this
document, except 7210 SAS-S 1/10GE.
• Refer to the 7210 SAS OS Software Release Notes for a list of USB devices and
capacities that are supported on the 7210 SAS.
• When a USB device is unplugged or removed from the system, a major alarm is
raised. The alarm can be cleared using the shutdown command.
To Next Page
Loading...
Need help?
General
