7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
System Management
Edition: 01 3HE 16132 AAAB TQZZA 321
6.11.3.1 System Information
This section describes the basic system information parameters to configure the
physical location of the router, contact information, location information for the router
such as an address, floor, and room number, global positioning system (GPS)
coordinates, and system name.
Use the CLI syntax displayed in this section to configure the following system
components:
• System Information Parameters
• System Time Elements
6.11.3.1.1 System Information Parameters
This section describes the system information parameters.
General system parameters include:
• Name
• Contact
• Location
• CLLI Code
• Coordinates
Name
Use the system name command to configure a name for the device. The name is
used in the prompt string. Only one system name can be configured. If multiple
system names are configured, the last one encountered overwrites the previous
entry.
Use the following CLI syntax to configure the system name.
CLI Syntax: config>system
name <system-name>
Example: config>system# name ALA-12
The following is a sample configuration for the system name command.
sysName@domain>config>system# info
To Next Page
Loading...
Need help?
General
