Nokia 7210 SAS-M - Page 323

7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
System Management
Edition: 01 3HE 16132 AAAB TQZZA 323
Use the following CLI command syntax to define the CLLI code.
CLI Syntax: config>system
clli-code <clli-code>
The following example shows the command usage to define the CLLI code.
Example: config>system# clli-code abcdefg1234
6.11.3.1.2 Coordinates
Use the optional coordinates command to specify the GPS location of the device. If
the string contains special characters (#, $, spaces, etc.), the entire string must be
enclosed within double quotes.
Use the following CLI syntax to configure the location.
CLI Syntax: config>system
coordinates coordinates
The following example shows the command usage to configure the location.
Example: config>system# coordinates "N 45 58 23, W 34 56 12"
The following is a sample configuration output of the general system commands.
sysName@domain>config>system# info
#------------------------------------------
echo "System Configuration "
#------------------------------------------
name "ALA-12"
contact "Fred Information Technology"
location "Bldg.1-floor 2-Room 201"
clli-code "abcdefg1234"
coordinates "N 45 58 23, W 34 56 12"
...
exit
----------------------------------------------
A:ALA-12>config>system#
6.11.3.1.3 System Time Elements
The system clock maintains time according to Coordinated Universal Time (UTC).
Configure information time zone and summer time (daylight savings time)
parameters to correctly display time according to the local time zone.