Nokia 7210 SAS-M - 2.9.1.3 Monitor Commands; 2.9.1.4 Environment Commands; 2.9.2 Command Descriptions

CLI Usage
54
7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
3HE 16132 AAAB TQZZA Edition: 01
2.9.1.3 Monitor Commands
monitor
— filter
— ip ip-filter-id entry entry-id [interval seconds] [repeat repeat] [absolute | rate]
— ipv6 ipv6-filter-id entry entry-id [interval seconds] [repeat repeat] [absolute|rate]
— mac mac-filter-id entry entry-id [interval seconds] [repeat repeat] [absolute | rate]
— lag lag-id [lag-id...(up to 5 max)] [interval seconds] [repeat repeat] [absolute | rate]
— port port-id [port-id...(up to 5 max)] [interval seconds] [repeat repeat] [absolute | rate]
—
router
— service
— id service-id
— sap sap-id [interval seconds] [repeat repeat] [absolute | rate]
— sdp sdp-id [far-end] ip-address [interval seconds] [repeat repeat] [absolute |
rate]
— management-access-filter
2.9.1.4 Environment Commands
root
— environment
— alias alias-name alias-command-name
—no alias alias-name
— [no] create
— [no] more
— reduced-prompt [no of nodes in prompt]
—no reduced-prompt
— [no] saved-ind-prompt
— terminal
— length lines
— width width
— time-display {local | utc}
— [no] time-stamp
2.9.2 Command Descriptions
• Global Commands
• CLI Environment Commands
• Show Commands
• Monitor CLI Commands