CLI Usage
70
7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
3HE 16132 AAAB TQZZA Edition: 01
Supported
Platforms
Supported on all 7210 SAS platforms as described in this document, including those
operating in access-uplink mode
Description This command enables the substitution of a command line by an alias.
Use the alias command to create alternative names for an entity or command string that are
r easier to remember and understand. If the string contains special characters (#, $, spaces,
and others), the entire string must be enclosed within double quotes. Only a single command
can be present in the command string.
The alias command can be entered in any context but must be created in the environment
context.
For example, to create an alias named soi to display OSPF interfaces, enter:
alias soi “show router ospf interface”
Parameters alias-name — Specifies the alias name. Do not use a valid command string for the alias.
If the alias specified is an actual command, this causes the command to be replaced
by the alias.
alias-command-line — Specifies the command line to be associated with the alias.
create
Syntax [no] create
Context environment
Supported
Platforms
Supported on all 7210 SAS platforms as described in this document, including those
operating in access-uplink mode
Description This command is required to create a new OS entity.
The no form of the command disables requiring the create keyword.
Default create
more
Syntax [no] more
Context environment
Supported
Platforms
Supported on all 7210 SAS platforms as described in this document, including those
operating in access-uplink mode
To Next Page
Loading...
Need help?
General
