Nokia 7210 SAS-M - 4.11.1.4 Saving a Configuration to a Different Filename

Boot Options
182
7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
3HE 16132 AAAB TQZZA Edition: 01
eth-mgmt-speed
persist
no ping-address
no primary-config
no primary-dns
no primary-image
save
no secondary-config
no secondary-dns
no secondary-image
no tertiary-config
no tertiary-dns
no tertiary-image
no uplinkA-address
no uplinkA-autoneg
no uplinkA-duplex
no uplinkA-speed
no uplinkA-port
no uplinkA-route
no uplinkA-vlan
no uplinkB-address
no uplinkB-autoneg
no uplinkB-duplex
no uplinkB-speed
no uplinkB-port
no uplinkB-route
no uplinkB-vlan
wait
4.11.1.4 Saving a Configuration to a Different Filename
Save the current configuration with a unique filename to have additional backup
copies and to edit parameters with a text editor. You can save your current
configuration to an ASCII file.
Use one of the following CLI syntax to save a configuration to a different location.
CLI Syntax: bof# save [cflash-id]
Example: A:ALA-1# bof
A:ALA-1>bof# save cf1:
A:ALA-1>bof#
or
CLI Syntax: admin# save [file-url] [detail] [index]