7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
CLI Usage
Edition: 01 3HE 16132 AAAB TQZZA 73
width
Syntax width width
Context environment>terminal
Supported
Platforms
Supported on all 7210 SAS platforms as described in this document
Description This command sets the terminal screen width (number of characters).
Default 80
Parameters width — Specifies the number of characters for the terminal screen width, expressed as
a decimal integer.
Values 1 to 512
time-display
Syntax time-display {local | utc}
Context environment
Supported
Platforms
Supported on all 7210 SAS platforms as described in this document, including those
operating in access-uplink mode
Description This command displays timestamps in the CLI session based on local time or Coordinated
Universal Time (UTC).
The system keeps time internally in UTC and is capable of displaying the time in either UTC
or local time based on the time zone configured.
This configuration command is only valid for times displayed in the current CLI session. This
includes displays of event logs, traps and all other places where a timestamp is displayed.
In general all timestamps are shown in the time selected. This includes log entries destined
for console/session, memory, or SNMP logs. Log files on compact flash are maintained and
displayed in UTC format.
Default time-display local — Displays time stamps based on the local time.
time-stamp
Syntax time-stamp
Context environment
To Next Page
Loading...
Need help?
General
