CLI Usage
84
7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
3HE 16132 AAAB TQZZA Edition: 01
Description This command enables the context to configure criteria to monitor statistical information for
BGP, LDP, MPLS, OSPF, and RSVP protocols.
Parameters router-instance — Specifies the router name or service ID.
Values router-name: Base, management
service-id: 1 to 2147483647
Default Base
service
Syntax service
Context monitor
Supported
Platforms
Supported on all 7210 SAS platforms as described in this document, including those
operating in access-uplink mode
Description This command enables the context to configure criteria to monitor specific service SAP
criteria.
id
Syntax id service-id
Context monitor>service
Supported
Platforms
Supported on all 7210 SAS platforms as described in this document, including those
operating in access-uplink mode
Description This command displays statistics for a specific service, specified by the service-id, at the
configured interval until the configured count is reached.
The first screen displays the current statistics related to the service-id. The subsequent
statistical information listed for each interval is displayed as a delta to the previous display.
When the keyword rate is specified, the “rate per second” for each statistic is displayed
instead of the delta.
Monitor commands are similar to show commands but only statistical information displays.
Monitor commands display the selected statistics according to the configured number of
times at the interval specified.
Parameters service-id — Specifies the unique service identification number of the service in the
service domain.
To Next Page
Loading...
Need help?
General
