Nokia 7210 SAS-M - Page 324

System Management
324
7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
3HE 16132 AAAB TQZZA Edition: 01
Time elements include:
• Zone
• Summer Time Conditions
• NTP
• SNTP
• CRON
Zone
The zone command sets the time zone and/or time zone offset for the device. The
7210 SAS OS supports system-defined and user-defined time zones.
Use the following CLI syntax to set the time zone.
CLI Syntax: config>system>time
zone std-zone-name|non-std-zone-name [hh [:mm]]
The following example shows the command usage to set the time zone.
Example: config>system>time#
config>system>time# zone GMT
The following is a sample zone output:
A:ALA-12>config>system>time# info
----------------------------------------------
ntp
server 192.168.15.221
no shutdown
exit
sntp
shutdown
exit
zone UTC
----------------------------------------------
A:ALA-12>config>system>time#
Table 41 describes the system-defined time zones.
Table 41 System-defined Time Zones
Acronym Time Zone Name UTC Offset
Europe