Nokia 7210 SAS-M User Manual

System Management
322
7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
3HE 16132 AAAB TQZZA Edition: 01
#------------------------------------------
echo "System Configuration "
#------------------------------------------
name "ALA-12"
...
exit
----------------------------------------------
sysName@domain>config>system#
Contact
Use the contact command to specify the name of a system administrator, IT staff
member, or other administrative entity.
Use the following syntax to specify the contact name.
CLI Syntax: config>system
contact <contact-name>
The following example shows the command usage to specify the contact name.
Example: config>system# contact “Fred Information Technology”
Location
Use the location command to specify the system location of the device. For example,
enter the city, building address, floor, and room number where the router is located.
Use the following CLI syntax to configure the location.
CLI Syntax: config>system
location <location>
The following example shows the command usage to configure the location of the
device.
Example: config>system# location “Bldg.1-floor 2-Room 201”
CLLI Code
The Common Language Location Code (CLLI code) is an 11-character standardized
geographic identifier that is used to uniquely identify the geographic location of a
router.

Nokia 7210 SAS-M Specifications

General

Brand	Nokia
Model	7210 SAS-M
Category	Cell Phone
Language	English