Nokia 7210 SAS-M User Manual

Boot Options
140
7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
3HE 16132 AAAB TQZZA Edition: 01
Figure 8 System Initialization: Bootstrap Process for Auto-init Mode
When the both.tim file is successfully downloaded, control is passed from the
bootstrap image to the TiMOS image. The TiMOS image attempts to load the
configurations from the downloaded configuration file. If no configuration file location
is present in the BOF, the system is loaded with the default configuration.
See Auto-init Mode for more information about the auto-init mode process.
sw0453
DHCP
response
received?
Receive IP, static route,
and BOF path in
DHCP response
Configure new IP address on the uplink
port on which DHCP response was
received and download BOF
Send DHCP broadcast requests on
the uplink ports one port at a time
(designated for auto-init)
Load and boot up with image;
wait 5 minutes for user intervention
Local image (both.tim)
found on flash?
CLI
command
auto-init stop?
BOOT process complete
Send trap to SNMP
Save
BOF?
BOF download
successful?
Save
BOF?
Boot up
Restart
Auto-init mode
B
A
Yes
Yes
Yes
Yes
Yes
No
No
No
No
No
R
Note: During the auto-init procedure, if the configuration file or image file download fails
from the network, the system reinitiates the auto-init process.

Nokia 7210 SAS-M Specifications

General

Brand	Nokia
Model	7210 SAS-M
Category	Cell Phone
Language	English