Nokia 7210 SAS-M - Page 192

Boot Options
192
7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
3HE 16132 AAAB TQZZA Edition: 01
The system attempts to use the configuration specified in primary-config. If the specified file
cannot be located, the system automatically attempts to obtain the configuration from the
location specified in secondary-config and then the tertiary-config.
If an error in the configuration file is encountered, the boot process aborts.
The no form of this command removes the primary-config configuration.
Parameters file-url — Specifies the primary configuration file location, expressed as a file URL.
Values file-url [local-url | remote-url] (up to 180 characters)
local-url [<cflash-id/> | <usb-flash-id>][file-path]
remote-url[{ftp://|tftp://} login:pswd@remote-locn/][file-path]
cflash-idcf1:, cf2
usb-flash-id uf1:
uf1: (7210 SAS-M)
cf1:|cf2:|uf1: (7210 SAS-T, 7210 SAS-Sx 1/10GE,
7210 SAS-Sx 10/100GE, and 7210 SAS-Mxp)
cf2: | cf2-A: | cf2-B: | uf1: | uf1-A: | uf1-B: (7210 SAS-R6 and
7210 SAS-R12)
cf1: | cf2: (7210 SAS-S 1/10GE)
primary-image
Syntax primary-image file-url
no primary image
Context bof
Supported
Platforms
Supported on all 7210 SAS platforms as described in this document, including those
operating in access-uplink mode
Description This command configures the primary directory location for runtime image file loading.
The system attempts to load all runtime image files configured in the primary-image first. If
this fails, the system attempts to load the runtime images from the location configured in the
secondary-image. If the secondary image load fails, the tertiary image specified in tertiary-
image is used.
The no form of this command removes the primary-image configuration.
Parameters file-url — Specifies the location-url can be either local (this flash) or a remote FTP server.
Values file-url [local-url | remote-url] (up to 180 characters)
local-url [<cflash-id/> | <usb-flash-id>][file-path]
remote-url[{ftp://|tftp://} login:pswd@remote-locn/][file-path]
cflash-idcf1:, cf2
usb-flash-id uf1:
uf1: (7210 SAS-M)