Boot Options
194
7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
3HE 16132 AAAB TQZZA Edition: 01
Supported
Platforms
Supported on all 7210 SAS platforms as described in this document, including those
operating in access-uplink mode
Description This command configures the secondary directory location for runtime image file loading.
The system attempts to load all runtime image files configured in the primary-image first. If
this fails, the system attempts to load the runtime images from the location configured in the
secondary-image. If the secondary image load fails, the tertiary image specified in tertiary-
image is used.
The no form of the command removes the secondary-image configuration.
Parameters file-url — The file-url can be either local (this local flash) or a remote FTP server.
Values file-url [local-url | remote-url] (up to 180 characters)
local-url [<cflash-id/> | <usb-flash-id>][file-path]
remote-url[{ftp://|tftp://} login:pswd@remote-locn/][file-path]
cflash-idcf1:, cf2
usb-flash-id uf1:
uf1: (7210 SAS-M)
cf1: | cf2: | uf1: (7210 SAS-T, 7210 SAS-Sx 1/10GE,
7210 SAS-Sx 10/100GE, and 7210 SAS-Mxp)
cf2: | cf2-A: | cf2-B: | uf1: | uf1-A: | uf1-B: (7210 SAS-R6 and
7210 SAS-R12)
cf1: | cf2: (7210 SAS-S 1/10GE)
tertiary-config
Syntax tertiary-config file-url
no tertiary-config
Context bof
Supported
Platforms
Supported on all 7210 SAS platforms as described in this document, including those
operating in access-uplink mode
Description This command configures the name and location of the tertiary configuration file.
The system attempts to use the configuration specified in tertiary-config if both the primary
and secondary config files cannot be located. If this file cannot be located, the system boots
with the factory default configuration.
If an error in the configuration file is encountered, the boot process aborts.
The no form of the command removes the tertiary-config configuration.
To Next Page
Loading...
Need help?
General
