Boot Options
202
7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
3HE 16132 AAAB TQZZA Edition: 01
mask — Specifies the subnet mask length when the IP prefix is specified in CIDR
notation. When the IP prefix is specified in CIDR notation, a forward slash (/)
separates the ip-address from the mask parameter. The mask parameter indicates
the number of bits used for the network portion of the IP address; the remainder of
the IP address is used to determine the host portion of the IP address.
Values 0 to 32
next-hop ip-address — Specifies the next hop IP address used to reach the destination.
uplinkB-route
Syntax [no] uplinkB-route ip-address/mask next-hop ip-address
Context bof
Supported
Platforms
7210 SAS-M (network mode and access-uplink mode), 7210 SAS-Mxp, 7210 SAS-Sx/S 1/
10GE, 7210 SAS-Sx 10/100GE, 7210 SAS-T (network mode and access-uplink mode)
Description This command configures an uplinkB static route.
Parameters ip-address — Specifies the IP address of the BOF. This address must be unique within
the subnet and specified in dotted decimal notation.
Values a.b.c.d
mask — Specifies the subnet mask length when the IP prefix is specified in CIDR
notation. When the IP prefix is specified in CIDR notation, a forward slash (/)
separates the ip-address from the mask parameter. The mask parameter indicates
the number of bits used for the network portion of the IP address. The remainder of
the IP address is used to determine the host portion of the IP address.
Values 0 to 32
next-hop ip-address — Specifies the next-hop IP address used to reach the destination.
uplinkA-speed
Syntax uplinkA-speed speed
Context bof
Supported
Platforms
7210 SAS-M (network mode and access-uplink mode), 7210 SAS-Mxp, 7210 SAS-Sx/S 1/
10GE, 7210 SAS-Sx 10/100GE, 7210 SAS-T (network mode and access-uplink mode)
Description This command configures the speed for the uplinkA port when auto-negotiation is disabled in
the running configuration and the BOF.
If the port is configured to auto-negotiate, this parameter is ignored.