Nokia 7210 SAS-M - Page 352

System Management
352
7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
3HE 16132 AAAB TQZZA Edition: 01
The following example shows the command usage to configure a URL for a CLI script
that runs when the boot-up configuration is completed.
Example: config>system# boot-bad-exec ftp://
test:test@192.168.xx.xxx/./
fail.cfg
config>system# boot-good-exec ftp://
test:test@192.168.xx.xxx/./
ok.cfg
The following is a sample command output.
*A:ALA# configure system
*A:ALA>config>system# info
----------------------------------------------
#--------------------------------------------------
echo "System Configuration"
#--------------------------------------------------
name "ALA"
boot-good-exec "cf1:\good.cfg"
boot-bad-exec "cf1:\bad.cfg"
snmp
shutdown
exit
login-control
idle-timeout disable
pre-login-message "ala-1" name
exit
time
ntp
authentication-key 1 key "SV3BxZCsIvI" hash type message-digest
server 10.135.16.130
peer 10.0.0.1 key-id 1
no shutdown
exit
sntp
server-address 10.135.16.90 preferred
no shutdown
exit
zone UTC
exit
thresholds
rmon
exit
exit
#--------------------------------------------------
echo "System Security Configuration"
#--------------------------------------------------
security
hash-control read-version all write-version 1
telnet-server
ftp-server