System Management
408
7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
3HE 16132 AAAB TQZZA Edition: 01
SFD8D, SFD4A, SFD4B, SFD4C, SFD4D, SFD4E, SFD4F, SFD4G,
SFD4H, SFD2A, SFD2B, SFD2C, SFD2D, SFD2E, SFD2F, SFD2G,
SFD2H, SFD2I, SFD2L, SFD2M, SFD2N, SFD2O, SFD2P, SFD2Q,
SFD2R (DWDM)
ascii-string — Can use ASCII alphabets or numbers. Valid card-type
acronyms are listed in the Table 43.
shutdown
Syntax [no] shutdown
Context config>system>vwm-shelf>card
Supported
Platforms
7210 SAS-M (network and access-uplink), 7210 SAS-T (network and access-uplink),
7210 SAS-Mxp, 7210 SAS-R6 and 7210 SAS-R12
Description This command allows the user to administratively disable the management of a specific
module inserted in a slot on the clip-on device. When this command is executed, the
7210 SAS software clears all pending events/traps/alarms/LED related to this card.
The no form of this command allows the user to administratively enable the management of
the card on the clip-on device. The software raises appropriate events/traps/alarms for the
card.
Default no shutdown
6.12.2.1.3 Virtual Chassis (VC) Configuration Commands
vc-stack
Syntax vc-stack
Context config>system
Supported
Platforms
7210 SAS-Sx 1/10GE: standalone-VC and 7210 SAS-S 1/10GE: standalone-VC
Description This command enables the context to configure VC parameters.
vc-stack-node
Syntax vc-stack-node slot-number mac-address mac-address [create]
no vc-stack-node slot-number
To Next Page
Loading...
Need help?
General
