Nokia 7210 SAS-M User Manual

System Management
438
7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
3HE 16132 AAAB TQZZA Edition: 01
Supported
Platforms
Supported on all 7210 SAS platforms as described in this document, including platforms
configured in the access-uplink operating mode
Description This command configures the node to receive broadcast packets on a given subnet.
Broadcast and multicast messages can easily be spoofed, thus, authentication is strongly
recommended. If broadcast is not configured then received NTP broadcast traffic will be
ignored. Use the show command to view the state of the configuration.
The no form of this command removes the address from the configuration.
Parameters router router-name — Specifies the router name used to receive NTP packets.
Values Base, management
Default Base
interface ip-int-name — Specifies the local interface on which to receive NTP broadcast
packets, up to 32 characters. If the string contains special characters (#, $, spaces,
and so on), the entire string must be enclosed within double quotes.
authenticate — Specifies whether or not to require authentication of NTP PDUs. When
enabled, NTP PDUs are authenticated upon receipt.
ntp-server
Syntax ntp-server [authenticate]
no ntp-server
Context config>system>time>ntp
Supported
Platforms
Supported on all 7210 SAS platforms as described in this document, including platforms
configured in the access-uplink operating mode
Description This command configures the node to assume the role of an NTP server. Unless the server
command is used, this node will function as an NTP client only and will not distribute the time
to downstream network elements.
Default no ntp-server
Parameters authenticate — Keyword to make authentication a requirement. If authentication is
required, the authentication key ID received in a message must have been
configured in the authentication-key command, and that the key ID type and value
must also match.
peer
Syntax peer ip-address [key-id key-id] [version version] [prefer]
no peer ip-address
Context config>system>time>ntp

Nokia 7210 SAS-M Specifications

General

Brand	Nokia
Model	7210 SAS-M
Category	Cell Phone
Language	English