Nokia 7210 SAS-M User Manual

7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
System Management
Edition: 01 3HE 16132 AAAB TQZZA 449
daily
Syntax daily start start-time-of-day end end-time-of-day
no daily start
Context config>system>cron>time-range
Supported
Platforms
Supported on all 7210 SAS platforms as described in this document, including platforms
configured in the access-uplink operating mode
Description This command configures the start and end of a schedule for every day of the week. To
configure a daily time-range across midnight, use a combination of two entries. An entry that
starts at hour zero will take over from an entry that ends at hour 24.
The no form of this command removes the daily time parameters from the configuration.
Parameters start-time-of-day — Specifies the starting time for the time range.
Values start-time-of-day — hh:mm
hh — 0 to 23
mm — 0 to 59
end-time-of-day — Specifies the ending time for the time range.
Values end-time-of-day — hh:mm
hh — 0 to 23
mm — 0 to 59
weekdays
Syntax weekdays start start-time-of-day end end-time-of-day
no weekdays start
Context config>system>cron>time-range
Supported
Platforms
Supported on all 7210 SAS platforms as described in this document, including platforms
configured in the access-uplink operating mode
Description This command configures the start and end of a weekday schedule.
The no form of this command removes the weekday parameters from the configuration.
Parameters start-time-of-day — Specifies the starting time for the time range.
Values start-time-of-day — hh:mm
hh — 0 to 23
mm — 0 to 59

Nokia 7210 SAS-M Specifications

General

Brand	Nokia
Model	7210 SAS-M
Category	Cell Phone
Language	English