7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
System Management
Edition: 01 3HE 16132 AAAB TQZZA 451
This command configures the start and end of a schedule for the same day every week; for
example, every Friday. The start and end dates must be the same. The resolution must be at
least one minute apart, for example, start at 11:00 and end at 11:01. A start time and end time
of 11:00 is invalid.
The no form of this command removes the weekly parameters from the configuration.
Default no time-range
Parameters start start-time-in-week — Specifies the start day and time of the week.
Values start-time-in-week — day,hh:mm
day — sun, mon, tue, wed, thu, fri, sat
sunday, monday, tuesday, wednesday, thursday, friday,
saturday
hh — 0 to 23
mm — 0 to 59
end end-time-in-week — Specifies the end day and time of the week.
Values end-time-in-week — day,hh:mm
day — sun, mon, tue, wed, thu, fri, sat
sunday, monday, tuesday, wednesday, thursday, friday,
saturday
hh — 0 to 23
mm — 0 to 59
Time of Day Commands
tod-suite
Syntax tod-suite tod-suite name create
no tod-suite
Context config>system>cron
Supported
Platforms
Supported on all 7210 SAS platforms as described in this document, including platforms
configured in the access-uplink operating mode
Description This command enables the context to modify time of day (TOD) parameters.
Default no tod-suite
egress
Syntax egress
To Next Page
Loading...
