System Management
474
7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
3HE 16132 AAAB TQZZA Edition: 01
6.12.2.1.9 System Administration Commands
admin
Syntax admin
Context <root>
Supported
Platforms
Supported on all 7210 SAS platforms as described in this document
Description This command enables the context to configure administrative system commands. Only
authorized users can execute the commands in the admin context.
check-golden-bootstrap
Syntax check-golden-bootstrap
Context admin
Supported
Platforms
7210 SAS-M (network and access-uplink), 7210 SAS-T (network and access-uplink)
Description This command validates the current golden bootstrap image, and displays its version, if found
to be valid. If the golden bootstrap image is not found to be a valid, an error message is
displayed to that effect.
auto-init
Syntax auto-init stop
Context admin
Supported
Platforms
Supported on all 7210 SAS platforms as described in this document, including platforms
configured in the access-uplink operating mode; not supported on 7210 SAS-R6,
7210 SAS-R12, and 7210 SAS platforms configured in the standalone-VC operating mode
Description This command specifies that the system saves the BOF with the BOF parameter primary-
image pointing to the both.tim on the local flash. When the system boots up for the first-time,
auto-init can potentially use the TiMOS images available on the local flash to boot up and
provide a user login prompt. With this command, user is provided with an option to stop the
auto-init process and complete successful boot.
If the user does not use this command to stop the auto-init process, the system reboots and
attempts to find the BOF again using DHCP.
To Next Page
Loading...
Need help?
General
