System Management
502
7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
3HE 16132 AAAB TQZZA Edition: 01
remote-lag remote-lag-id — Specifies the LAG ID on the remote system.
Values 1 to 800
system-priority system-priority — Specifies the system priority to be used in the context
of the MC-LAG. The partner system will consider all ports using the same lacp-key,
system-id, and system-priority as part of the same LAG.
Values 1 to 65535
6.12.2.1.16 LLDP System Commands
lldp
Syntax lldp
Context config>system
Supported
Platforms
Supported on all 7210 SAS platforms as described in this document, including platforms
configured in the access-uplink operating mode
Description This command enables the context to configure system-wide Link Layer Discovery Protocol
parameters.
lldp-med
Syntax lldp-med
Context config>system>lldp
Supported
Platforms
7210 SAS-Sx/S 1/10GE: standalone and standalone-VC
Description This command creates the context to configure system-wide LLDP Media Endpoint
Discovery (LLDP-MED) information.
network-policy
Syntax network-policy network-policy-id [create]
no network-policy network-policy-id
Context config>system>lldp>lldp-med
Supported
Platforms
7210 SAS-Sx/S 1/10GE: standalone and standalone-VC
To Next Page
Loading...
