Nokia 7210 SAS-M User Manual

7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
System Management
Edition: 01 3HE 16132 AAAB TQZZA 515
• Either a port ID or a list of port ID or port ID ranges can be specified on the left-hand side
and the right hand-side of the ‘to’ keyword. See the following description for port ID
specification to know more about the restrictions that apply when configuring a port
range and list of ports.
• The list of entries is processed in the ascending order of the entry IDs, that is, an entry
with a lower entry ID is processed before entry with a higher entry ID.
The no form of this command removes the entry from the list of decommissioned ports. The
no form of this command requires a reboot to take effect.
The following examples show the list of ports, range of ports, and a combination of list of ports
and range of ports that can be specified.
List of ports can be specified as:
• 1/1/1, 1/1/2, 1/2/1, 1/1/10 is allowed
• 1/1/10, 1/1/2, 1/1/9, 1/1/5 is allowed
Range of ports can be specified as:
• 1/1/2-1/1/5 is allowed
• 1/2/1-1/2/2 is allowed
• 1/1/10-1/1/2 is not allowed
• 1/1/1 – 1/2/2 is not allowed
A combination of list of ports and range of ports can be specified as:
• 1/1/5,1/1/6,1/1/10-1/1/15,1/1/25 is allowed
• 1/1/5,1/1/6,1/1/10-1/1/12,1/1/13-1/1/15 is allowed
• 1/1/5,1/1/6,1/1/10-1/1/12,1/2/1-1/2/2 is allowed
Parameters entry-id — Specifies a number in the range 1 to 30. A maximum of 30 entries can be
created by the user.
Values 1 to 30
port-range — Specifies the port, list of ports, a port range, or a combination of these that
are being decommissioned when they appear on the left-hand side of the to keyword.
This parameter identifies the port or group of ports that receives the packet buffers
from the decommissioned ports. A group of ports can be specified as a list of ports
or as a range of ports.
The list of ports can be specified in any order using a comma to separate the list of
ports, while a port range must always be specified in the ascending order of port IDs
(in other words, the first port number specified in the range must be greater than the
second port number in the range) and a single range cannot refer to ports on different
MDA or different IMMs or different slots.

Nokia 7210 SAS-M Specifications

General

Brand	Nokia
Model	7210 SAS-M
Category	Cell Phone
Language	English