Nokia 7210 SAS-M User Manual

CLI Usage
56
7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
3HE 16132 AAAB TQZZA Edition: 01
admin Telnet 10.20.30.93 09AUG2004 08:35:23 0d 00:00:00 A
-------------------------------------------------------------------------------
Number of users : 2
'A' indicates user is in admin mode
===============================================================================
A:ALA-1#
A:ALA-1# enable-admin
MINOR: CLI Already in admin mode.
A:ALA-1#
back
Syntax back
Context <GLOBAL>
Supported
Platforms
Supported on all 7210 SAS platforms as described in this document, including those
operating in access-uplink mode
Description This command moves the context back one level in the command hierarchy. For example, if
the current level is the config router ospf context, the back command moves the cursor to
the config router context level.
clear
Syntax clear
Context <GLOBAL>
Supported
Platforms
Supported on all 7210 SAS platforms as described in this document, including those
operating in access-uplink mode
Description This command clears statistics for a specified entity, or it clears and resets the entity.
Parameters cron — Clears CRON history.
filter — Clears IPv4, IPv6, MAC, and log filter counters.
lag — Clears LAG-related entities.
log — Closes and reinitializes the log specified by log-id.
port — Clears port statistics.
qos — Clears QoS statistics.
radius — Clears the RADIUS server state.
router — Clears router commands affecting the router instance in which they are
entered.
Values arp, authentication, bfd, dhcp, forwarding-table, icmp-redirect-route,
interface, isis, ldp, mpls, ospf, rip, rsvp

Nokia 7210 SAS-M Specifications

General

Brand	Nokia
Model	7210 SAS-M
Category	Cell Phone
Language	English