Nokia 7210 SAS-M User Manual

System Management
630
7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
3HE 16132 AAAB TQZZA Edition: 01
sntp
Syntax sntp
Context show>system
Supported
Platforms
Supported on all 7210 SAS platforms as described in this document, including platforms
configured in the access-uplink operating mode
Description This command displays SNTP protocol configuration and state.
Output The following output is an example of SNTP information, and Table 81 describes SNTP
output fields.
Sample Output
*A:pc-4.0# show system sntp
===============================================================================
SNTP Status
===============================================================================
Admin Status : up Oper Status : up Mode : broadcast
===============================================================================
===============================================================================
SNTP Servers
===============================================================================
SNTP Server Version Preference Interval
-------------------------------------------------------------------------------
10.135.16.90 3 Preferred 64
-------------------------------------------------------------------------------
No. of SNTP Servers: 1
===============================================================================
*A:pc-4.0#
Dir Displays the direction of the unicast information: either Rx or Tx
Type Displays the message type
Rate Displays the rate of the unicast information, in packets per
second
Duration Displays the lease duration for the session
State Displays the state
Time Displays the time the unicast information was received
PTP Peers Displays the number of PTP peers
Total Packet Rate Displays the total packet rate, in packets per second
Table 80 Output Fields: PTP Unicast (Continued)
Label Description

Nokia 7210 SAS-M Specifications

General

Brand	Nokia
Model	7210 SAS-M
Category	Cell Phone
Language	English