7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
System Management
Edition: 01 3HE 16132 AAAB TQZZA 633
time
Syntax time
Context show>system
Supported
Platforms
Supported on all 7210 SAS platforms as described in this document, including platforms
configured in the access-uplink operating mode
Description This command displays the system time and zone configuration parameters.
Output The following output is an example of system time information, and Table 83 describes the
output fields.
Sample Output
A:ALA-1# show system time
Sample Type Displays the method of sampling the selected variable and
calculating the value to be compared against the thresholds
Startup Alarm Displays the alarm that may be sent when this alarm is first
created
Owner Displays the owner of this alarm
Description Displays the event cause
Event Id Displays the identifier of the threshold event
Last Sent Displays the date and time the alarm was sent
Action Type log — An entry is made in the RMON-MIB log table for each event
occurrence. This does not create a TiMOS logger entry. The
RMON-MIB log table entries can be viewed using the show
system thresholds command.
trap — A TiMOS logger event is generated. The TiMOS logger
utility then distributes the notification of this event to its
configured log destinations which may be CONSOLE, telnet
session, memory log, cflash file, syslog, or SNMP trap
destinations logs.
both — Both a entry in the RMON-MIB logTable and a TiMOS
logger event are generated
none — No action is taken
Owner Displays the owner of the event
Table 82 Output Fields: System Threshold (Continued)
Label Description (Continued)
To Next Page
Loading...
Need help?
General
