Nokia 7210 SAS-M - Page 64

CLI Usage
64
7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
3HE 16132 AAAB TQZZA Edition: 01
tos type-of-service — Specifies the type-of-service (TOS) bits in the IP header of the
ping packets, expressed as a decimal integer.
Values 0 to 255
size bytes — Specifies the size in bytes of the ping request packets.
Default 56 bytes (actually 64 bytes because 8 bytes of ICMP header data
are added to the packet)
Values 0 to 65507
pattern pattern — Specifies a 16-bit pattern string to include in the ping packet,
expressed as a decimal integer.
Values 0 to 16384
source ip-address — Specifies the source IP address to use in the ping requests in
dotted decimal notation.
Default The IP address of the egress IP interface.
Values ipv4-address - a.b.c.d
ipv6-address - x:x:x:x:x:x:x:x[-interface]
x:x:x:x:x:x:x:x [-interface]
x:x:x:x:x:x:d.d.d.d
x: 0 — FFFF H
d: 0 — 255 D
interval seconds — Specifies the interval in seconds between consecutive ping
requests, expressed as a decimal integer.
Default 1
Values 1 to 10000
next-hop ip-address — This option disregards the routing table and will send this packet
to the specified next hop address. This address must be on an adjacent router that
is attached to a subnet that is common between this and the next-hop router.
Default per the routing table
Values ipv4-address - a.b.c.d
ipv6-address - x:x:x:x:x:x:x:x[-interface]
x:x:x:x:x:x:d.d.d.d[-interface]
x - [0..FFFF]H
d - [0..255]D
interface interface-name — Specifies the interface name.
bypass-routing — Keyword to send the ping request to a host on a directly attached
network bypassing the routing table. The host must be on a directly attached network
or an error is returned.