Nokia 7210 SAS-M - Page 658

System Management
658
7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
3HE 16132 AAAB TQZZA Edition: 01
Selected For Use : No
Not Selected Due To : disabled
Source Port : None
Reference Input 2
Admin Status : down
Rx Quality Level : unknown
Quality Level Override : none
Qualified For Use : No
Not Qualified Due To : disabled
Selected For Use : No
Not Selected Due To : disabled
Source Port : None
===============================================================================
*A:7210SAS>show>system#
Table 90 Output Fields: Sync Interface Timing
Label Description
System Status CPM A Indicates the system status of CPM A
Reference Input Mode Indicates the reference input mode
Reference Order Indicates the reference order
Reference Input 1 Displays information about reference input 1
Admin Status Indicates the Admin status of reference input 1
down — Indicates the ref1 or ref2 configuration is
administratively shutdown
up — Indicates the ref1 or ref2 configuration is administratively
enabled
diag — Indicates the reference has been forced using the force-
reference command
Qualified For Use Indicates if the reference input 1 is qualified for use
Selected For Use Indicates if reference input 1 is selected for use
Source Port Displays the source port information
Reference Input 2 Displays information about reference input 2
Admin Status Indicates the Admin status of reference input 2
down — Indicates the ref1 or ref2 configuration is
administratively shutdown
up — Indicates the ref1 or ref2 configuration is administratively
enabled
diag — Indicates the reference has been forced using the force-
reference command
Qualified For Use Indicates if the reference input 2 is qualified for use