Nokia 7210 SAS-M User Manual

7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
System Management
Edition: 01 3HE 16132 AAAB TQZZA 671
alarm-contact-input
Syntax alarm-contact-input all
Context show>alarm-contact-input
Supported
Platforms
7210 SAS-M (netowrk and access-uplink), 7210 SAS-T (network and access-uplink),
7210 SAS-Mxp, 7210 SAS-R6, and, 7210 SAS-R12
Description This command displays information of all the alarm contact input pins.
Output The following output is an example of alarm contact input information, and Table 94 describes
the output fields.
Sample Output
*A:7210-2# show alarm-contact-input 1
===============================================================================
Alarm Contact Input
===============================================================================
Alarm Input Pin Number : 1
Alarm Input Pin Current State : Disabled
Alarm Output Pin Used : Major
===============================================================================
*A:7210-2#
Number of power supplies The number of power supplies installed in the chassis
Power supply number The ID for each power supply installed in the chassis
Configured power supply
type
The power supply type that is configured
AC power Within range — AC voltage is within range
Out of range — AC voltage is out of range
DC power Within range — DC voltage is within range
Out of range — DC voltage is out of range
Over temp Within range — The current temperature is within the
acceptable range
Out of range — The current temperature is above the
acceptable range
Status Up — The specified power supply is up
Down — The specified power supply is down
Table 93 Output Fields: Chassis (Continued)
Label Description (Continued)

Nokia 7210 SAS-M Specifications

General

Brand	Nokia
Model	7210 SAS-M
Category	Cell Phone
Language	English