Nokia 7210 SAS-M - Page 676

System Management
676
7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
3HE 16132 AAAB TQZZA Edition: 01
script-control
Syntax script-control
Context clear>system
Supported
Platforms
Supported on all 7210 SAS platforms as described in this document, including platforms
configured in the access-uplink operating mode
Description This command enables the context to clear script information.
script-policy
Syntax script-policy
Context clear>system>script-control
Supported
Platforms
Supported on all 7210 SAS platforms as described in this document, including platforms
configured in the access-uplink operating mode
Description This command enables the context to clear script policy information.
completed
Syntax completed [script-policy-name] [owner owner-name]
Context clear>system>script-control>script-policy
Supported
Platforms
Supported on all 7210 SAS platforms as described in this document, including platforms
configured in the access-uplink operating mode
Description This command clears completed script run history entries.
Parameters script-policy-name — Clears history entries only for the specified script-policy.
owner-name — Clears history entries only for script-policies with the specified owner.
Default “TiMOS CLI”
sync-if-timing
Syntax sync-if-timing {ref1 | ref2 | bits1 | bits2}
Context clear>system
Supported
Platforms
Supported on all 7210 SAS platforms as described in this document, including platforms
configured in the access-uplink operating mode; not supported on platforms configured in the
standalone-VC operating mode