Appendix: 7210 SAS Boot Procedures
716
7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
3HE 16132 AAAB TQZZA Edition: 01
Step 16. At the prompt, enter the name of the VC stack. The following output is
displayed.
Changing the VC Stack Name to VC123
Setting the VC name to 'VC123'.
Mac Address of this node is d0:99:d5:9a:6a:41
vc-stack-node field of First cpm-imm Node (cpmA)
------------------------------------------------
You must enter the VC Stack Slot Num that you intend to use
and the node's mac address seperated by a space.
Example, to use slot-num '1' and mac address 'aa:bb:cc:dd:ee:ff'
Type - '1 aa:bb:cc:dd:ee:ff'
Accepted VC Stack Slot Num values are - [1 to 8]
The existing vc-stack-node and mac field in bof is 'none'
vc-stack-node entry of cpmA [1 to 8] [mac address] : 1 d0:99:d5:9a:6a:41
Step 17. At the prompt, enter the VC stack slot number and MAC address for CPM-
A. The following output is displayed.
Using 1 as Vc Stack Slot Id of Node with mac d0:99:d5:9a:6a:41
VC Stack Slot Num of Second cpm-imm Node (cpmB)
-----------------------------------------------
You must enter the VC Stack Slot Num that you intend to use.
type 'none' if you do not have the details of second cpm-imm node.
Accepted VC Stack Slot num values are - [1 to 8]
The existing vc-stack-node and mac field in bof is 'none'
vc-stack-node entry of cpmB [1 to 8] [mac address] :
Step 18. At the prompt, enter the VC stack slot number and MAC address for CPM-
B. The following output is displayed.
Using 2 as Vc Stack Slot Id of Node with mac d0:99:d5:94:de:41
Software Location
-----------------
You must enter the URL of the TiMOS software.
The location can be on a Compact Flash device,
a USB flash drive, or on the network.
Here are some examples
cf1:/timos1.0R1
uf1:/timos1.0R1
ftp://user:passwd@192.168.1.150/./timos1.0R1
ftp://user:passwd@[3FFE::1]/./timos1.0R1
or Type 'auto' to retrieve BOF configuration through DHCP.
Software Image URL:
To Next Page
Loading...
Need help?
General
