Nokia 7210 SAS-M - Page 87

7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
CLI Usage
Edition: 01 3HE 16132 AAAB TQZZA 87
repeat repeat — Specifies how many times the command is repeated.
Default 10
Values 1 to 999
Output The following output is an example of SDP statistics.
Sample Output
A:ALA-12# monitor service id 100 sdp 10 repeat 3
===============================================================================
Monitor statistics for Service 100 SDP binding 10
===============================================================================
At time t = 0 sec (Base Statistics)
-------------------------------------------------------------------------------
I. Fwd. Pkts.:0I.Dro. Pkts. : 0
E. Fwd. Pkts.:0E.Fwd. Octets : 0
-------------------------------------------------------------------------------
At time t = 11 sec (Mode: Delta)
-------------------------------------------------------------------------------
I. Fwd. Pkts.:0I.Dro. Pkts. : 0
E. Fwd. Pkts.:0E.Fwd. Octets : 0
-------------------------------------------------------------------------------
At time t = 22 sec (Mode: Delta)
-------------------------------------------------------------------------------
I. Fwd. Pkts.:0I.Dro. Pkts. : 0
E. Fwd. Pkts.:0E.Fwd. Octets : 0
-------------------------------------------------------------------------------
At time t = 33 sec (Mode: Delta)
-------------------------------------------------------------------------------
I. Fwd. Pkts.:0I.Dro. Pkts. : 0
E. Fwd. Pkts.:0E.Fwd. Octets : 0
===============================================================================