EasyManua.ls Logo

Nokia 7368 ISAM CPE - Safety-Related Labels; ANSI Safety Guidelines; Table 1 Safety Labels

Nokia 7368 ISAM CPE
108 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ANSI safety guidelines
10
7368 ISAM CPE A-020W-A Product Guide
3FE-47511-AAAA-TCZZA Issue: 01
The following is an example of the Caution box.
The Caution box indicates that the described activity or situation may, or will, cause
service interruption.
Do not proceed beyond a caution until the indicated conditions are fully understood
and met.
The following is an example of the Note box.
The Note box provides information that assists the personnel working with A-020W-A
CPE equipment. It does not provide safety-related instructions.
2.1.2 Safety-related labels
The A-020W-A CPE equipment is labeled with specific safety compliance
information and instructions that are related to a variant of the A-020W-A. Observe
the instructions on the safety labels.
Table 1 provides examples of the text in the various A-020W-A CPE safety labels.
Table 1 Safety labels
Figure 1 shows a sample safety label for the A-020W-A CPE, located on the base of
the unit.
Caution 1 — Possibility of service interruption.
Caution 2 — Service interruption.
Note — Information of special interest.
Label text Description
ETL compliance Communication service equipment US listed.
ESD warning Caution: This assembly contains electrostatic sensitive device.
FCC standards compliance Tested to comply with FCC standards for home or office use.
Release 05.08.01 | June 2018 | Edition 01

Table of Contents

Related product manuals