Configure a A-020W-A
88
7368 ISAM CPE A-020W-A Product Guide
3FE-47511-AAAA-TCZZA Issue: 01
Procedure 34 UPnP and DLNA configuration
1 Select Application > UPnP and DLNA from the top-level menu in the Ethernet Gateway
window, as shown in Figure 39.
Figure 39 UPnP and DLNA window
2 Select the Enable UPnP check box to enable UPnP.
3 Click Save/Apply.
4 STOP. This procedure is complete.
8.1.6 Maintenance
The A-020W-A CPE supports maintenance tasks, including:
• password change
• device management
• backup and restore
• firmware upgrade
• device reboot
Release 05.08.01 | June 2018 | Edition 01
To Next Page
Loading...
