Nokia 7368 ISAM CPE - Figure 40 Password Window; Table 36 Password Parameters

Configure a A-020W-A
90
7368 ISAM CPE A-020W-A Product Guide
3FE-47511-AAAA-TCZZA Issue: 01
• the first character cannot be a special character
• there are not enough character classes
1 Select Maintenance > Password from the top-level menu in the GPON Home Gateway
window, as shown in Figure 40.
Figure 40 Password window
Table 36 describes the fields in the password window.
Table 36 Password parameters
2 Configure the new password.
3 Click Save.
4 STOP. This procedure is complete.
Field Description
New Password New password (must adhere to the password rules described above)
Re-enter Password Must match the new password entered above exactly
Prompt Message Password prompt message
Release 05.08.01 | June 2018 | Edition 01