7368 ISAM CPE A-020W-A Product Guide Configure a A-020W-A
Issue: 01 3FE-47511-AAAA-TCZZA 69
3 Click Save.
4 STOP. This procedure is complete.
Procedure 22 QoS configuration
1 Select Network > QoS Config from the top-level menu in the Ethernet Gateway window.
Figure 26 shows the window for configuring QoS L2 (Layer 2 packet sizes).
Figure 26 QoS Config window (L2)
Figure 27 shows the window for configuring QoS L3 (Layer 3 packet sizes).
Release 05.08.01 | June 2018 | Edition 01