7368 ISAM CPE A-020W-A Product Guide Configure a A-020W-A
Issue: 01 3FE-47511-AAAA-TCZZA 85
2 Configure port triggering.
3 Click Add.
4 STOP. This procedure is complete.
Open Port Enter the open port range
Triggering Port Enter the triggering port range
Expire Time Enter the expiration time in seconds
Open Protocol Choose the open port protocol from the drop-down menu:
• TCP
• UDP
• TCP/UDP
Trigger Protocol Choose the triggering port protocol from the drop-down menu:
• TCP
• UDP
• TCP/UDP
Enable Triggering Select this check box to enable port triggering
WAN Connection List Choose a WAN connection from the drop-down menu
Note: only active devices are shown on this menu
Field Description
(2 of 2)
Release 05.08.01 | June 2018 | Edition 01
To Next Page
Loading...
