Configure a G-240W-G indoor ONT
124
7368 ISAM ONT G-240W-G Product Guide
3FE-47555-AAAA-TCZZA Issue: 01
Table 42 Parental control parameters
2 Select the Access Control checkbox.
3 Click on the plus sign (+) to add a policy.
A separate panel displays for configuring the policy name, IP address of the device, and
dates and times for the policy.
4 Configure the parental control policy.
5 Click Enable to activate the policy.
6 STOP. This procedure is complete.
Field Description
Access Control Select this checkbox to enable access control
Add Access Control rule
Policy Name Enter a name for the parental control policy or choose a policy from the list
MAC Address Enter the MAC address or choose a MAC address from the list
IPv4 Address Enter the IPv4 address for the device or choose an IPv4 address from the list
Url Port Enter the URL port for the device
Days of week Choose Every Day, or Individual Days and select the checkboxes for the days of the week
for which the policy applies
From Enter the times for the policy to be in effect
To
Release 05.08.01a | August 2018 | Edition 01
To Next Page
Loading...
