7368 ISAM ONT G-240W-G Product Guide Configure a G-240W-G indoor ONT
Issue: 01 3FE-47555-AAAA-TCZZA 159
 
When the password does not meet the password rules, the application displays a message to 
indicate which password rule has not been followed, for example:
• the password is too short
• the password is too long
• the first character cannot be a special character
• there are not enough character classes
1 Select Maintenance > Password from the top-level menu in the GPON Home Gateway 
window, as shown in Figure 77.
Figure 77 Password window
Table 58 describes the fields in the password window.
Table 58 Password parameters
2 Configure the new password.
Field Description
New Password New password (must adhere to the password rules described above)
Re-enter Password Must match the new password entered above exactly
Prompt Message Password prompt message
Release 05.08.01a | August 2018 | Edition 01