Configure a G-240W-G indoor ONT
72
7368 ISAM ONT G-240W-G Product Guide
3FE-47555-AAAA-TCZZA Issue: 01
2 Enter your username and password in the Log in window, as shown in Figure 18.
The default user name is userAdmin. The default password is a random number, which is
included in the ONT kit.
Figure 18 Web login window
3 Click Login. The Device Information screen appears.
4 STOP. This procedure is complete.
7.2.2 Device and connection status
G-240W-G ONTs support the retrieval of a variety of device and connection
information, including:
• device information
• LAN status
• WAN status
Caution — Pressing the Reset button for less than 10 seconds reboots
the ONT; pressing the Reset button for 10 seconds resets the ONT to the
factory defaults, except for the LOID and SLID.
Note — If you forget the current username and password, press the
reset button for 5 s and the default values for the username and password
will be recovered at startup.
Note — To help protect the security of your Internet connection, the
application displays a pop-up reminder to change both the Wi-Fi
password and the ONT password.
To increase password security, use a minimum of 10 characters,
consisting of a mix of numbers and upper and lower case letters.
Release 05.08.01a | August 2018 | Edition 01
To Next Page
Loading...
