7368 ISAM ONT G-240W-G Product Guide Configure a G-240W-G indoor ONT
Issue: 01 3FE-47555-AAAA-TCZZA 91
2 Select the mode for each port.
3 Click Save.
4 Enter the DHCP configuration information.
5 Click Save.
6 Enter the Static DHCP information.
7 Click Add.
You can also use this panel to delete a Static DHCP MAC address or IPv4 address.
8 STOP. This procedure is complete.
DHCP End IP Address Ending DHCP IP address
DHCP Lease Time DHCP lease time (in min)
Primary DNS Primary DNS identifier
Secondary DNS Secondary DNS identifier
Static DHCP Entry
MAC Address MAC address for the static DHCP
IPv4 Address IPv4 address for the static DHCP
Field Description
(2 of 2)
Release 05.08.01a | August 2018 | Edition 01
To Next Page
Loading...
