7750 SR ESA 100G Chassis Installation Guide
Release 20.5
Transceivers
Issue: 01 3HE 16094 AAAA TQZZA 39
5.2.1 Locking and Release Mechanisms
Nokia transceivers can use different lock and release methods. Possible lock and
release mechanisms include:
• locking handle—a locking handle (lever) in the front of the transceiver that you
gently raise or lower to insert or remove from the port
• bail—a bar or wire latch in the front of the transceiver that you pull down and
outward to release the module
• tabs on the sides of the transceiver that you press inward
5.2.2 Installing Transceivers
To install a transceiver:
Step 1. Remove the transceiver from its anti-static packaging.
Step 2. Holding the transceiver by its sides, slide the unit into the port at a straight
angle until it clicks into place.
Step 3. Remove the plug from the transceiver optical bore when you are ready to
attach the network cable.
To Next Page
Loading...
