Scroll to the desired name, and press Details. Scroll
through the phone numbers added to the name.
To save a name and phone number in the selected
memory, press Menu, and select Contacts > Add contact.
Key in the first name, and press OK. If you are using the
telephone memory, key in the second name, and press
OK. Key in the phone number, including the area code, and
press OK. Select the number type, and press Select >
Done.
Tip: To use the phone number while abroad,
press
twice (for the + character), and key in
the country code, area code (omit the leading
zero, if necessary), and phone number.
To delete contacts and all the numbers attached to them,
in standby mode, press Menu, and select Contacts >
Delete. Select One by one or Delete all.
To delete a single number added to a name, in standby
mode, scroll down to the desired name, and press
Details. Scroll to the number that you want to delete, press
Options, and select Delete number.
Settings for the contacts
In standby mode, press Menu, and select Contacts >
Settings, and one of the following options:
• Memory in use — To select the memory that you want
to use for your contacts.
• Contacts view — To select how the contacts are
shown.
Profiles
Press Menu, and select Profiles.
To change the profile, select the desired profile, and select
Activate.
To activate a profile for a certain time, select the desired
profile and Timed. Set the time (up to 24 hours) when you
wish the profile setting to end. When the end time is
reached, the previous profile, which was not timed,
becomes active.
Tip: To activate a profile in standby mode, briefly
press the power key, and select the desired
profile.
You can edit the profile settings in the communicator
interface of your device. See "Profile settings," p. 80.
Settings
Press Menu, and select Settings.
To adjust call settings, scroll to Call settings, and select:
• Call divert (network service) — select to direct your
incoming calls to another number such as your voice
mailbox.
• Anykey answer — select On if you want to answer an
incoming call by briefly pressing any key except the
power key, the selection keys, and the End key.
• Automatic redial — select On to set the phone to make
a maximum of 10 more attempts to connect the call
after an unsuccessful call attempt.
• Speed dialling — select On if you want to call the
names and phone numbers assigned to the speed
27
Cover phone
Cyan
To Next Page
Loading...
