File manager
In File manager, you can manage the contents and
properties of files and folders.
Go to Desk > Office > File manager.
On the left frame of the File manager view, you can
browse and select folders. To expand and collapse folders,
scroll right and left with the joystick. On the right frame
you can open subfolders and files. To move up one folder
level, select
, and press Open. To move from one frame
to another, press the tab key.
Managing files and folders
To open a folder, select the folder, and press Open. A view
of all the subfolders and files of the parent folder opens.
To open a subfolder, select the folder, and press Open. To
open the upper-level folder, select
, and press Open.
Press Close folder to return to the main view.
To open a file, select the file, and press Open. The
appropriate application opens the file. Note that you can
open only one file at a time.
Tip: To view hidden files, press Menu, and
select View > Show all files.
To create a new file or folder, move to the location where
you want to create the new file or folder, press Menu, and
select File > New folder or New file.... Enter the name, and
press OK.
To move or copy files or folders, select the file or folder,
press Menu, and select Edit > Cut or Copy. Then move to
the location where you want to place the file or folder,
press Menu, and select Edit > Paste.
Tip: You can also move files or folders by pressing
Move.
To rename files or folders, select the file or folder, press
Menu, and select File > Rename. Enter the new name, and
press Rename. It is recommended that you do not change
the names of the default folders. Default folders are
folders that the device creates during the first start-up,
such as C:\My files\ and C:\My files\Templates\.
To delete files or folders, select the file or folder, and press
Delete.
To view and modify properties of a file, folder, or drive,
select the file, folder, or drive, press Menu, and select
File > Properties.... To prevent the file or folder from
being edited, select the Read-only field, and select Yes. To
change a file into hidden state, select the Hidden field and
Yes.
74
File manager
Cyan
To Next Page
Loading...
