browse for the certificate file. Press Delete to remove a
selected certificate.
To check the authenticity of a certificate, select
Security > Certificate manager. Select a certificate, and
press View details. The Issued to: field identifies the
owner of this certificate. Make sure that this is the name
of the party to whom the certificate belongs. The
Fingerprint: field uniquely identifies the certificate.
Contact the help desk or customer service of the owner of
the certificate and ask for the MD5 fingerprint of the
certificate. Compare the fingerprint with the one shown
in the dialog to check whether they match.
Tip: Check the authenticity of a certificate each
time you add a new certificate.
To change the trust settings of a certificate, select
Security > Certificate manager. Select the certificate,
press View details, and press Trust settings. Depending on
the certificate, a list of the applications that can use the
selected certificate is shown. Select an application field,
and change the value to Yes or No. Note that you cannot
change the trust settings of a personal certificate.
To change the private key store password, select
Security > Certificate manager, select the Password
page, and press Change password. Enter the current
password, press OK, and enter the new password twice.
You need the private key store password when using
personal certificates. The private key store contains the
secret keys that come with personal certificates.
Extras
Go to Desk > Tools > Control panel > Extras.
About product
To view the version number of the software, select
Extras > About product, and scroll to the bottom of the
dialog.
Location privacy
Some networks allow others to request the position of
your device (network service). Note that a separate
positioning module is needed for this service.
To set the device to accept or reject all position requests,
select Extras > Location privacy, and select the
Verification policy field. Select Accept all or Reject all.
Location request log
To view the location request log, select Extras > Location
request log. The log shows a list of received location
requests, displaying the name or phone number of the
requester, time and date, and whether the request was
accepted.
HP printer selection
See "Managing mobile printing settings," p. 110.
Service command editor
Service requests, also known as USSD commands, are
messages that you send to your service provider. These
may be activation commands for network services.
88
Control panel
Cyan
To Next Page
Loading...
