number, place the cursor on the number, and
press Call number to call the number.
Text message settings
To define general sending options for text messages,
press Menu, and select Tools > Account settings.... Select
Text message, and press Edit. To move from one dialog
page to another, press the Menu key.
On the General page, define the following:
• Service centre in use — Select the message center to
deliver the messages.
• Delivery report — Select whether to view the status of
the sent text messages in Log.
• Send text message — Select when to send the text
messages. If you select Upon request, you must select
a message in Outbox and press Send to send it.
• Validity period — Select how long the message center
stores messages if a recipient cannot be reached. Note
that the network must support this feature.
On the Concatenation page, define the following:
• Concatenation — Select No to send text messages
longer than 160 characters as several messages. Select
Yes to send text messages that are longer than 160
characters as several messages, and allow them to be
received as one long message by compatible devices.
Sending a message over 160 characters may be more
expensive than one message.
• Confirm multipart messages — Select whether you
want to see a confirmation note when you try to send
text messages exceeding 160 characters.
See the User Guide on the CD-ROM for advanced settings.
Modifying message center settings
To view message centers, press Menu, and select Tools >
Account settings.... Select Text message, and press Edit. In
General, press Service centres.
To edit message centers, press Edit, and enter the Service
centre name and Service centre number.
To add new message centers, press New, and enter the
Service centre name and Service centre number.
To delete message centers, scroll to a center, and press
Delete.
Picture messages
Note: The picture message function can be used
only if it is supported by your network operator or service
provider. Only compatible devices that offer picture
message features can receive and display picture
messages. The appearance of a message may vary
depending on the receiving device.
To view a picture message, select the message in
Messaging, and press Open.
To reply to the sender, press Reply via text msg.. Note that
the picture is not included in the reply.
To forward a picture message, press Forward. Press
Recipient to select a recipient, write the message text, and
press Send. Note that the picture message text cannot be
longer than 120 characters.
46
Messaging
Cyan
To Next Page
Loading...
