To play a multimedia object, select the object, and
press Open.
Multimedia message account
settings
Go to Messaging, press Menu, and select Tools > Account
settings.... Scroll to Multimedia message service, and press
Edit.
On the Send page, define the following settings:
• Internet access — Select the Internet access point
(IAP) connection you want to use for sending
messages.
• Homepage — Enter the address of the multimedia
messaging center.
• Receive report — Select whether you want to receive
a notification when the message has been successfully
delivered to the recipient. Receiving a delivery report
of a multimedia message that has been sent to an e-
mail address may not be possible.
• Sending time — Select when you want the multimedia
message to be sent.
• Validity period — Select how long the messaging
center tries to send the message. If the recipient of a
message cannot be reached within the validity period,
the message is removed from the multimedia
messaging center. Maximum is the maximum amount
of time allowed by the network. Note that the network
must support this feature.
On the Receive page, define the following settings:
• Multimedia reception — Select when you want to
receive multimedia messages. For example, you can
receive multimedia messages always or only in your
home network.
• On receiving messages — Select Receive if you want to
receive multimedia messages. The reception of
multimedia messages is on by default. Select Defer if
you want the multimedia messaging center to save the
messages to be retrieved later. Change this setting
to Receive when you want to retrieve the messages.
Select Reject if you want to reject multimedia
messages. The multimedia messaging center will
delete the messages.
• Receive advertisements — Select whether you want to
receive messages defined as advertisements.
• Receive anonymous messages — Select whether you
want to receive messages from unknown senders.
On the General page, define the following settings:
• Compress images — Select whether you want to
compress images that you include in your multimedia
messages. Compression may make the multimedia
message size smaller.
Fax
To send a fax, press Write message. Scroll to Fax, and press
OK. Press Recipient, and select the recipient from the
Contacts directory. You can also enter the number
yourself. Write the message, and press Send.
To change the fax sending, press Menu, and select
Tools > Sending options....
To change the font and format of fax text, press Menu, and
select Format > Font..., Formatting, or Alignment.
49
Messaging
Cyan
To Next Page
Loading...
