Clock
In Clock, you can view the date and time of your home
and destination city, and manage clock alarms.
Go to Desk > Clock.
Using world clock
To set the date and time, press Menu, and select Tools >
Date and time....
Tip: You can also update date and time
automatically (network service). You can select
this setting in Control panel. See "Date and
time," p. 76.
To switch between the home and destination city
information, press the tab key.
To change a city, select either the home or destination
city, and press Change city.
Tip: If you change the home city, the clock and
calendar entries are updated. This is useful for
example when you want to attend phone
conferences.
To view and manage alarms, press Alarm clock.
To change the clock type, press Menu, and select View >
Clock type, and select Analog or Digital.
Tip: To change to the one-clock view which shows
only your home city information, press Menu, and
select View > Remote city details.
Using Alarm clock
To set an alarm, press New alarm, and enter the alarm
time.
To modify an alarm, press Edit alarm.
To remove an alarm, press the backspace key.
When the alarm sounds, press Stop on the communicator
interface or Exit on the cover phone to turn it off. Press
Snooze to postpone the alarm. Even though the cover
phone is switched off when the alarm time is reached, the
alarm sounds and an alarm note is shown on the cover
phone. Press View to read the alarm note.
99
Clock
Cyan
To Next Page
Loading...
