• Contrast level — Press + or - to increase or decrease
the difference between the lightest and darkest areas
on the screen.
• Brightness — Press + or - to increase or decrease the
amount of white the colors contain.
• Brightness period — Select a time period after which
the display is dimmed if the device remains inactive.
• Screen saver — Select a time period after which the
display is automatically switched off if there have been
no key presses within that time.
Tip: You can adjust brightness also by pressing
Chr+space bar.
To define the color set for the dialogs and controls, select
General > Display. On the Colour page, select the Colour
schemes field, select one of the color sets, and press Done.
To define the cursor speed and acceleration, select
General > Display, and select the Cursor settings page.
Specify how fast the cursor moves, and how much it
accelerates as you move it faster.
Wallpapers
To change the background image of the communicator
interface, select General > Wallpapers. Select the Desk
page, and in the Wallpaper field, select Yes. Select the
Image file field, and press Change. Pre-installed
wallpapers are shown in the Select wallpaper dialog. To
search for other files, press Browse. Note that by default
only image files are shown. To view other types of files,
press Show all files. To view the selected image, press
Preview.
Similarly, you can change the background image of the
cover phone display on the Cover page.
Enhancement settings
To let the device answer phone calls automatically when
an enhancement is in use, select General > Enhancement
settings, select Headset, Loopset, or Car kit from the list,
and press Edit. In the Automatic answer field, select On.
To select the profile that is activated when you attach an
enhancement to your device, select General >
Enhancement settings, select Headset, Loopset, Car kit, or
TTY from the list, and press Edit. Change the profile in the
Default profile field. To select the currently active profile,
select Active.
To keep the light of the cover phone switched on when
the device is attached to a car kit, select General >
Enhancement settings, select Car kit from the list, and
press Edit. In the Cover display lights field, select Always
on.
To activate the TTY (teletypewriter), select General >
Enhancement settings, select TTY from the list, and press
Edit. In the TTY active field, select Yes.
Data management
Go to Desk > Tools > Control panel > Data
management.
78
Control panel
Cyan
To Next Page
Loading...
