25
General information
To insert a memory card
1 Close the device cover and make sure that the phone is switched off. If it is on,
press .
2 Open the hatch at the back of the communicator, using a minimum of two
fingers - one finger on each side of the hatch.
3 Slide the memory card under the memory card holder as shown in Figure 9.
Make sure that the gold contacts of the card are facing down.
Figure 9
4 When you have secured the card in place, close the hatch.
WARNING: Keep all memory cards out of the reach of small children.
General_information_Iss3.doc Page 25 Friday, October 18, 2002 5:37 PM
To Next Page
Loading...
