58
Phone
Line for outgoing calls (3-1-7)
If your network supports this service, you can have two phone lines in your
communicator. You can select which line you want to use for making calls. For
more information, see ‘Line selection page’ on page 90.
Phone settings (3-2)
Clock (3-2-1)
You can select whether the time is shown on the display.
Cell info display (3-2-2)
When this function is selected, the phone will indicate when it is used in a network
cell based on Micro-Cellular Network technology. MCN technology increases the
capacity of wireless networks in urban areas. The setting will remain in effect even
if the SIM card is changed or the phone is switched off.
Welcome note (3-2-3)
You can write a message of up to 44 characters which appears on the display when
you switch on the phone.
Network selection (3-2-4)
The network to which you are connected can be selected either automatically or
manually.
Linda1.book Page 58 Friday, April 12, 2002 8:31 PM
To Next Page
Loading...
